Has anybody put access holes in the bottom skin (fuse 40) to get to the
5/16"nuts and washers on the LG 26 to Fuse 5s attachment?
I have the bungee gear and the Fuse 5s are not split. Any thoughts,
pros, cons, appreciated.
John Gleeson
Rebel 804 Down Under,
(where it's warm/hot) :-)
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
LG 26 (centre tube) to Fuse 5s hardware access
-
gleeso1
LG 26 (centre tube) to Fuse 5s hardware access
Many thanks for all the replies, I like the idea of being able to come
thru the top, makes it a one man (person);-) operation.
Will also look at the nut plate idea.
Regards
John
Rebel 804 down Under
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
thru the top, makes it a one man (person);-) operation.
Will also look at the nut plate idea.
Regards
John
Rebel 804 down Under
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
