Page 1 of 1

Ramble/Battery

Posted: Mon Feb 20, 2012 5:47 am
by Jim Cole
Well Bob, I am working away towards the ramble - engine hung, oil tank
installed, rudder pedals, brakes, master cylinder etc.

I am looking for a fitting to make a battery strap out of. I've made a
battery box to hang on the firewall and I've seen a strap where you make
about a 1" wide hinged strap that is joined by an adjustable "bear claw"
like fastener that you then tie-wire. I have no idea what they're called
or where to look?

Anyone have any ideas?

Thanks
Jim
Rebel 333

Bob Patterson wrote:
Glad to hear that, Ron !!

One of the original ideas of the Rambles was to provide a goal
for builders - some extra motivation !

Happy to hear it's working ! :-)

With Rambling, we're never really sure where we will end up-
some years we came right back to Canada because of high gas prices,
other years, we stayed in the US all the way across, because of
great tailwinds !! :-) That's why the possible stops are a bit
vague, and the options become wider as the trip progresses ! ;-)

There are builders here who are not nearly as far along as you are,
and they are definitely coming along !!

So - keep rivetting, everyone... The Ramble's coming !! ;-)

Depending on timing, and the group, we may very well end up
flying into Oshkosh at the end of the Ramble, so that can be
another goal...




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------