The Murphy Builders Site

Posted: **Sun Feb 19, 2012 7:51 pm**

Hi guys New Rebel builder here. Has any one used this tool Rivedrill?
comments

Thanks Rusty
Log In - Register

Worldwide Distributor of Aircraft Parts and Pilot Supplies

Popular Searches

Airframe Parts
Avionics
Books & Videos
Composite Materials
Covering Supplies
Electrical
Engine Parts
Hardware
Instruments
Landing Gear
Metals & Plastics
Pilot Shop
Tools
Wood Products
Kits & Plans
FBO Supplies

West Coast
East Coast
Canada
Avionics - West
Avionics - East

Representatives

Dates/Locations
EAA Homepage
EAA Chapter Listing
EAA Credit Card

2008 Air Shows
Specials/New Products
Employment
Customer Comments

Tools - Drilling Equipment
RIVEDRILLT

The patented drill attachment that easily converts
cordless, electric and pneumatic drills into blind rivet guns. This
innovative new tool allows operators to set up to 14 rivets per minute -
twice as many as can be set by standard hand tools. And the new RiveDrillT
is also ergonomically friendly, requiring just 6.6 pounds of pressure to
operate, compared to 77.2 pounds required for hand tool operation.

The RiveDrillT can be quickly inserted into a
3/8"-reversible power drill as any standard drill bit would and is able to
set any standard blind rivet up to 3/16" aluminum. The shank of the rivet is
expelled when the drill is operated in the "reverse" mode. (For cordless
electric power drills, a minimum 12v battery is recommended.) Nosepieces for
1/8", 5/32" and 3/16" sizes are included.

Specifications

a.. Model 110
b.. Weight: .618 Lbs. (280 grams)
c.. Length: 5.5 in. (1441 mm)
d.. Diameter: 2.4 in. (60 mm)
e.. Battery for cordless drill: 12V 4Nosepieces included:
1/8", 5/32", 3/16"
f.. Drill Types: Cordless, Electric, Pneumatic
g.. Rivet capacities: 1/8", 5/32", 3/16" aluminum standard
rivets; 1/8", 5/32" steel standard rivets; 1/8" stainless standard rivets.

Description Part No. Price Buy
RIVEDRILL BLIND RIVET TOOL 12-00253 $54.25

.

Images are for reference only and actual product appearance may vary.

----- Original Message -----
From: "Karen McCaffery" <cristucker@webtv.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, August 13, 2008 6:10 AM
Subject: [rebel-builders] Continental 0-240B

Roger Hoffman and other Builders,
Rebel #719 is ready for an engine. Would you share your opinion and
experience with your new Cont 0-240B. Does the fuel injection work well
and would you recommend this engine to another Rebel Builder?
Thanks, Cris Tucker

-----Original Message-----
From: indabush@hay.net
Sent: Monday, August 11, 2008 11:55 AM
To: Rebel Digest,
Subject: [rebel-builders] Need to replace tires

With the narrow Matco rims (Model W62) I would like to go with a 700 size
tire versus an 800. Anyone got experience with the smaller tire? Any
downside?

Mike, C-FNBO

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 7:51 pm**

After Googling it I found their website and watched their video which runs
so fast you have to view it a few times to get the idea. I don't think you
are going to want that tool. You have to run your drill in one direction to
set the rivet, then run your drill in reverse to expel the mandrel. You are
not going to want to do that 20,000 times. Buy a regular $40 pneumatic rivet
gun. Then you just pull the trigger once for each rivet. You'll be setting a
whole bunch of rivets in place then going from one rivet to the next, pop,
pop, pop. It would take you a lot longer to do that with the Rivedrill.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of rusty
& patti hood
Sent: Wednesday, August 13, 2008 6:28 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] New? Rivet tool

Hi guys New Rebel builder here. Has any one used this tool Rivedrill?
comments

Thanks Rusty
Log In - Register

Worldwide Distributor of Aircraft Parts and Pilot Supplies

Popular Searches

Airframe Parts
Avionics
Books & Videos
Composite Materials
Covering Supplies
Electrical
Engine Parts
Hardware
Instruments
Landing Gear
Metals & Plastics
Pilot Shop
Tools
Wood Products
Kits & Plans
FBO Supplies

West Coast
East Coast
Canada
Avionics - West
Avionics - East

Representatives

Dates/Locations
EAA Homepage
EAA Chapter Listing
EAA Credit Card

2008 Air Shows
Specials/New Products
Employment
Customer Comments

Tools - Drilling Equipment
RIVEDRILLT

The patented drill attachment that easily converts
cordless, electric and pneumatic drills into blind rivet guns. This
innovative new tool allows operators to set up to 14 rivets per minute -
twice as many as can be set by standard hand tools. And the new RiveDrillT
is also ergonomically friendly, requiring just 6.6 pounds of pressure to
operate, compared to 77.2 pounds required for hand tool operation.

The RiveDrillT can be quickly inserted into a
3/8"-reversible power drill as any standard drill bit would and is able to
set any standard blind rivet up to 3/16" aluminum. The shank of the rivet is

expelled when the drill is operated in the "reverse" mode. (For cordless
electric power drills, a minimum 12v battery is recommended.) Nosepieces for

1/8", 5/32" and 3/16" sizes are included.

Specifications

a.. Model 110
b.. Weight: .618 Lbs. (280 grams)
c.. Length: 5.5 in. (1441 mm)
d.. Diameter: 2.4 in. (60 mm)
e.. Battery for cordless drill: 12V 4Nosepieces included:
1/8", 5/32", 3/16"
f.. Drill Types: Cordless, Electric, Pneumatic
g.. Rivet capacities: 1/8", 5/32", 3/16" aluminum standard
rivets; 1/8", 5/32" steel standard rivets; 1/8" stainless standard rivets.

Description Part No. Price Buy
RIVEDRILL BLIND RIVET TOOL 12-00253 $54.25

.

Images are for reference only and actual product appearance may vary.

----- Original Message -----
From: "Karen McCaffery" <cristucker@webtv.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, August 13, 2008 6:10 AM
Subject: [rebel-builders] Continental 0-240B

Roger Hoffman and other Builders,
Rebel #719 is ready for an engine. Would you share your opinion and
experience with your new Cont 0-240B. Does the fuel injection work well
and would you recommend this engine to another Rebel Builder?
Thanks, Cris Tucker

-----Original Message-----
From: indabush@hay.net
Sent: Monday, August 11, 2008 11:55 AM
To: Rebel Digest,
Subject: [rebel-builders] Need to replace tires

With the narrow Matco rims (Model W62) I would like to go with a 700 size
tire versus an 800. Anyone got experience with the smaller tire? Any
downside?

Mike, C-FNBO

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 7:51 pm**

I have one of these and used it to build my control surfaces when I started building in a spare bedroom and couldn't have a compressor running in the house. I used it on a Panasonic cordless drill and it worked great. You get used to reversing the drill quicqly, and can actually go pretty fast from one rivet to the next.
I reccomend it for a situation like that where you can't use an air compresssor
Jesse> Date: Wed, 13 Aug 2008 10:39:41 -0800> From: mkimball@gci.net> Subject: RE: [rebel-builders] New? Rivet tool> To: rebel-builders@dcsol.com> > After Googling it I found their website and watched their video which runs> so fast you have to view it a few times to get the idea. I don't think you> are going to want that tool. You have to run your drill in one direction to> set the rivet, then run your drill in reverse to expel the mandrel. You are> not going to want to do that 20,000 times. Buy a regular $40 pneumatic rivet> gun. Then you just pull the trigger once for each rivet. You'll be setting a> whole bunch of rivets in place then going from one rivet to the next, pop,> pop, pop. It would take you a lot longer to do that with the Rivedrill.> > Mike> 044SR> > -----Original Message-----> From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of rusty> & patti hood> Sent: Wednesday, August 13, 2008 6:28 AM> To: rebel-builders@dcsol.com> Subject: Re: [rebel-builders] Ne
w? Rivet tool> > Hi guy
s
New Rebel builder here. Has any one used this tool Rivedrill? > comments> > Thanks Rusty> Log In - Register> > Worldwide Distributor of Aircraft Parts and Pilot Supplies> > > > > > > > > Popular Searches> > Airframe Parts> Avionics> Books & Videos> Composite Materials> Covering Supplies> Electrical> Engine Parts> Hardware> Instruments> Landing Gear> Metals & Plastics> Pilot Shop> Tools> Wood Products> Kits & Plans> FBO Supplies> > > > West Coast> East Coast> Canada> Avionics - West> Avionics - East> > > Representatives> > > Dates/Locations> EAA Homepage> EAA Chapter Listing> EAA Credit Card> > > 2008 Air Shows> Specials/New Products> Employment> Customer Comments> > > > > > > > > > > > > > > > > > > > > > > > Tools - Drilling Equipment> RIVEDRILLT> > The patented drill attachment that easily converts > cordless, electric and pneumatic drills into blind rivet guns. This > innovative new tool allows operators to set up to 14 rivets per minute - > twice as many as can be set by standard
hand tools. And the new

RiveDrillT > is also ergonomically friendly, requiring just 6.6 pounds of pressure to > operate, compared to 77.2 pounds required for hand tool operation.> > The RiveDrillT can be quickly inserted into a > 3/8"-reversible power drill as any standard drill bit would and is able to > set any standard blind rivet up to 3/16" aluminum. The shank of the rivet is> > expelled when the drill is operated in the "reverse" mode. (For cordless > electric power drills, a minimum 12v battery is recommended.) Nosepieces for> > 1/8", 5/32" and 3/16" sizes are included.> > > Specifications> > a.. Model 110> b.. Weight: .618 Lbs. (280 grams)> c.. Length: 5.5 in. (1441 mm)> d.. Diameter: 2.4 in. (60 mm)> e.. Battery for cordless drill: 12V 4Nosepieces included: > 1/8", 5/32", 3/16"> f.. Drill Types: Cordless, Electric, Pneumatic> g.. Rivet capacities: 1/8", 5/32", 3/16" aluminum standard > rivets; 1/8", 5/32" steel standard rivets; 1/8" stainless standard rivets.> > Description Part No. Price Buy> RIVEDR
ILL BLIND RIVET TOOL 12
-
00253 $54.25> > > > > > > > > .> > Images are for reference only and actual product appearance may vary.> > > ----- Original Message ----- > From: "Karen McCaffery" <cristucker@webtv.net>> To: <rebel-builders@dcsol.com>> Sent: Wednesday, August 13, 2008 6:10 AM> Subject: [rebel-builders] Continental 0-240B> > > >> > Roger Hoffman and other Builders,> > Rebel #719 is ready for an engine. Would you share your opinion and > > experience with your new Cont 0-240B. Does the fuel injection work well > > and would you recommend this engine to another Rebel Builder? > > Thanks, Cris Tucker> >> >> > -----Original Message-----> > From: indabush@hay.net> > Sent: Monday, August 11, 2008 11:55 AM> > To: Rebel Digest,> > Subject: [rebel-builders] Need to replace tires> >> > With the narrow Matco rims (Model W62) I would like to go with a 700 size> > tire versus an 800. Anyone got experience with the smaller tire? Any> > downside?> >> > Mike, C-FNBO> >> >> >> >> > ------------------------------------
-----------------------
-
-----> > List archives located at: https://mail.dcsol.com/login> > username "rebel" password "builder"> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com> > List administrator: mike.davis@dcsol.com> > -----------------------------------------------------------------> >> >> >> >> >> >> >> >> > -----------------------------------------------------------------> > List archives located at: https://mail.dcsol.com/login> > username "rebel" password "builder"> > Unsubscribe: rebel-builders-unsubscribe@dcsol.com> > List administrator: mike.davis@dcsol.com> > -----------------------------------------------------------------> >> >> >> > > > > > > > -----------------------------------------------------------------> List archives located at: https://mail.dcsol.com/login> username "rebel" password "builder"> Unsubscribe: rebel-builders-unsubscribe@dcsol.com> List administrator: mike.davis@dcsol.com> -----------------------------------------------------------------> > > > > > > -------------------
-----------------------
-
----------------------> List archives located at: https://mail.dcsol.com/login> username "rebel" password "builder"> Unsubscribe: rebel-builders-unsubscribe@dcsol.com> List administrator: mike.davis@dcsol.com> -----------------------------------------------------------------> > >
_________________________________________________________________
Reveal your inner athlete and share it with friends on Windows Live.
http://revealyourinnerathlete.windowsli ... athlete_us

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------