[rebel-builders] VG's on Rebel stabilizer and pneumatic tailwheel
Posted: Sun Feb 19, 2012 7:51 pm
Ken,
Very interesting about the wheel. Can you give us a little more detail? Are
you still using the std. MAM fork? How about a part # or URL for the wheel?
Was this one of Princess Auto's pneumatic caster wheels?
Thanks.
Ron
On Sun, Aug 10, 2008 at 1:42 PM, Ken <klehman@albedo.net> wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Very interesting about the wheel. Can you give us a little more detail? Are
you still using the std. MAM fork? How about a part # or URL for the wheel?
Was this one of Princess Auto's pneumatic caster wheels?
Thanks.
Ron
On Sun, Aug 10, 2008 at 1:42 PM, Ken <klehman@albedo.net> wrote:
...
Also replaced the solid MAM tailwheel with a 2"x6" pneumatic wheel from
Princess Auto. I replaced the junk bearings with 6202-8 2RS permanently
lubed and sealed bearings which increased the expenditure by $10.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------