VG's on Rebel stabilizer and pneumatic tailwheel
Posted: Sun Feb 19, 2012 7:51 pm
I stuck 15 Harrison VG's on the underside of each stab. Admittedly that
is not as many as recommended but I can't say that I notice any
improvement. I'm not seeing any increased authority at or near max up
elevator deflection for 3 point landings.
Also replaced the solid MAM tailwheel with a 2"x6" pneumatic wheel from
Princess Auto. I replaced the junk bearings with 6202-8 2RS permanently
lubed and sealed bearings which increased the expenditure by $10. Seems
to work just fine. It is a lighter wheel and it gives a smoother and
quieter taxi. At 30 psi, hopefully it will be a bit better on soft
surfaces but it really isn't any wider than the original. Downside is
that I guess I'll have to carry another spare inner tube...
Oh what the heck, at $4. for a complete wheel,tire,and tube, maybe I'll
carry a complete spare wheel until I see how it holds up.
Ken
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
is not as many as recommended but I can't say that I notice any
improvement. I'm not seeing any increased authority at or near max up
elevator deflection for 3 point landings.
Also replaced the solid MAM tailwheel with a 2"x6" pneumatic wheel from
Princess Auto. I replaced the junk bearings with 6202-8 2RS permanently
lubed and sealed bearings which increased the expenditure by $10. Seems
to work just fine. It is a lighter wheel and it gives a smoother and
quieter taxi. At 30 psi, hopefully it will be a bit better on soft
surfaces but it really isn't any wider than the original. Downside is
that I guess I'll have to carry another spare inner tube...
Oh what the heck, at $4. for a complete wheel,tire,and tube, maybe I'll
carry a complete spare wheel until I see how it holds up.
Ken
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------