tapered corner wraps (Fus-10) over or under?
Posted: Sun Feb 19, 2012 7:47 pm
I'm trying to figure out what the correct (best?) overlap is on the tapered
corner wrap with Fuse-26 and Fus-25 below the door sill area. Here's a
photo from the Rebel CD to make my question easier to understand.
<a
href="http://mae.ucdavis.edu/ransom/Murphy/20 ... use.jpg</a>
In this the tapered corner wrap is underneath, then the triangle Fus-25,
then the rectangle Fus-26 is outermost. Is this the best way, or have some
found a better layering order?
Thanks,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
corner wrap with Fuse-26 and Fus-25 below the door sill area. Here's a
photo from the Rebel CD to make my question easier to understand.
<a
href="http://mae.ucdavis.edu/ransom/Murphy/20 ... use.jpg</a>
In this the tapered corner wrap is underneath, then the triangle Fus-25,
then the rectangle Fus-26 is outermost. Is this the best way, or have some
found a better layering order?
Thanks,
-Ben/ 496R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------