[rebel-builders] Tank rivets

[Ron Shannon]

IMHO, best source for all specialty rivets and other fastners, with best
service, is Hanson Rivets. (http://www.hansonrivet.com/) They have online
catalog, but not ordering, so you have to call and talk to a real person
who actually knows the products. What a concept.

Ron


On Fri, Dec 16, 2011 at 9:04 AM, <paul.lennemann@dcsol.com> wrote:

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[wayne pederson]

http://www.hansonrivet.com/w22.htm


Wayne Pederson

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Ron
Shannon
Sent: Friday, December 16, 2011 12:41 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Tank Rivets

IMHO, best source for all specialty rivets and other fastners, with best
service, is Hanson Rivets. (http://www.hansonrivet.com/) They have online
catalog, but not ordering, so you have to call and talk to a real person
who actually knows the products. What a concept.

Ron


On Fri, Dec 16, 2011 at 9:04 AM, <paul.lennemann@dcsol.com> wrote:

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[paul.lennemann]

Thanks for the point in the right direction. There is nothing like great
information to remind me to send some $ to Mike.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Doug Farrow]

Different topic
Drill bits
I'm looking for # drills. # 30,40,20 and 11. I can't believe how hard they are to find here in Ontario can anyone help
Thanks
Doug
778R

Sent from my iPhone

On 2011-12-16, at 3:06 PM, paul.lennemann@dcsol.com wrote:

Thanks for the point in the right direction. There is nothing like great
information to remind me to send some $ to Mike.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Charles W. Boekhorst]

Doug,

[Mark Banus]

Here is where I get mine:

http://www.averytools.com/products.asp?dept=38

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Doug
Farrow
Sent: Friday, December 16, 2011 4:17 PM
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Tank Rivets

Different topic
Drill bits
I'm looking for # drills. # 30,40,20 and 11. I can't believe how hard they
are to find here in Ontario can anyone help Thanks Doug 778R

Sent from my iPhone

On 2011-12-16, at 3:06 PM, paul.lennemann@dcsol.com wrote:

Thanks for the point in the right direction. There is nothing like
great information to remind me to send some $ to Mike.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rick greenwood]

Hello Paul ,be preparedHanson rivet-200 1/8 x.063-.125 grip=30.00 tank ,closed end rivet 100 1/8x.126-.187 grip=20.00 shipping handling 26.00 (to CAN bourder) broker fee/etc =40 (bourder to northern Ont) =126 MAM 500 1/8x1/8(same size)=70 +S+H tank rivet Thats as of 2 weeks ago,motto of the math ,don't cross the border. Rick 233R

Date: Fri, 16 Dec 2011 08:04:30 -0900
From: paul.lennemann@dcsol.com
Subject: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Wayne G. O'Shea]

Nope... as Rick points out, just order them from Mattic... where they came
from in the first place!!! http://www.mattic.ca/ sales@mattic.ca


----- Original Message -----
From: "rick greenwood" <rgreenwood@hotmail.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, December 16, 2011 10:52 PM
Subject: RE: [rebel-builders] Tank Rivets

Hello Paul ,be preparedHanson rivet-200 1/8 x.063-.125 grip=30.00 tank
,closed end rivet 100 1/8x.126-.187 grip=20.00
shipping handling 26.00 (to CAN bourder)
broker fee/etc =40 (bourder to northern Ont)
=126 MAM 500 1/8x1/8(same size)=70 +S+H tank rivet Thats as of 2
weeks ago,motto of the math ,don't cross the border. Rick 233R

Date: Fri, 16 Dec 2011 08:04:30 -0900
From: paul.lennemann@dcsol.com
Subject: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Paul Lennemann]

I'm south of the border in Washington State. Thanks, Paul

----------------------------------------

From: "rick greenwood" <rgreenwood@hotmail.ca>
Sent: Friday, December 16, 2011 7:56 PM
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Tank Rivets

Hello Paul ,be preparedHanson rivet-200 1/8 x.063-.125 grip=30.00 tank
,closed end rivet 100 1/8x.126-.187 grip=20.00 shipping handling 26.00 (to
CAN bourder) broker fee/etc =40 (bourder to northern Ont) =126 MAM 500
1/8x1/8(same size)=70 +S+H tank rivet Thats as of 2 weeks ago,motto of the
math ,don't cross the border. Rick 233R

Date: Fri, 16 Dec 2011 08:04:30 -0900
From: paul.lennemann@dcsol.com
Subject: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[drewjan]

Sounds like you got UPSed. Always insist that anything coming over the border be shipped by regular mail. $5 for inspection and HST but about half the time stuff just arrives with no charges at all.
Sent on the TELUS Mobility network with BlackBerry

-----Original Message-----
From: rick greenwood <rgreenwood@hotmail.ca>
Sender: mike.davis@dcsol.com
Date: Fri, 16 Dec 2011 20:52:44
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Tank Rivets


Hello Paul ,be preparedHanson rivet-200 1/8 x.063-.125 grip=30.00 tank ,closed end rivet 100 1/8x.126-.187 grip=20.00 shipping handling 26.00 (to CAN bourder) broker fee/etc =40 (bourder to northern Ont) =126 MAM 500 1/8x1/8(same size)=70 +S+H tank rivet Thats as of 2 weeks ago,motto of the math ,don't cross the border. Rick 233R

Date: Fri, 16 Dec 2011 08:04:30 -0900
From: paul.lennemann@dcsol.com
Subject: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rick greenwood]

I think your right Drew.But I did ask for pacel post,either way it was still $40 for UPS broker fee and shipping(delivered by Puralator) plus the $26 US shipping.Lesson lerned.Rick

Subject: Re: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Date: Sat, 17 Dec 2011 18:28:45 +0000

Sounds like you got UPSed. Always insist that anything coming over the border be shipped by regular mail. $5 for inspection and HST but about half the time stuff just arrives with no charges at all.
Sent on the TELUS Mobility network with BlackBerry

-----Original Message-----
From: rick greenwood <rgreenwood@hotmail.ca>
Sender: mike.davis@dcsol.com
Date: Fri, 16 Dec 2011 20:52:44
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Tank Rivets


Hello Paul ,be preparedHanson rivet-200 1/8 x.063-.125 grip=30.00 tank ,closed end rivet 100 1/8x.126-.187 grip=20.00 shipping handling 26.00 (to CAN bourder) broker fee/etc =40 (bourder to northern Ont) =126 MAM 500 1/8x1/8(same size)=70 +S+H tank rivet Thats as of 2 weeks ago,motto of the math ,don't cross the border. Rick 233R

Date: Fri, 16 Dec 2011 08:04:30 -0900
From: paul.lennemann@dcsol.com
Subject: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[John R. Davidson]

The other problem with UPS is, if there's nobody home to receive the goods, they go to the UPS distribution centre and I have to make a forty minute drive to pick them up. With postal service, the goods go to the nearest post office for pickup. Much more convenient.

John

From: rgreenwood@hotmail.ca
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Tank Rivets
Date: Sun, 18 Dec 2011 07:16:01 -0700


I think your right Drew.But I did ask for pacel post,either way it was still $40 for UPS broker fee and shipping(delivered by Puralator) plus the $26 US shipping.Lesson lerned.Rick

Subject: Re: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com
From: drewjan@cabletv.on.ca
Date: Sat, 17 Dec 2011 18:28:45 +0000

Sounds like you got UPSed. Always insist that anything coming over the border be shipped by regular mail. $5 for inspection and HST but about half the time stuff just arrives with no charges at all.
Sent on the TELUS Mobility network with BlackBerry

-----Original Message-----
From: rick greenwood <rgreenwood@hotmail.ca>
Sender: mike.davis@dcsol.com
Date: Fri, 16 Dec 2011 20:52:44
To: <rebel-builders@dcsol.com>
Reply-to: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] Tank Rivets


Hello Paul ,be preparedHanson rivet-200 1/8 x.063-.125 grip=30.00 tank ,closed end rivet 100 1/8x.126-.187 grip=20.00 shipping handling 26.00 (to CAN bourder) broker fee/etc =40 (bourder to northern Ont) =126 MAM 500 1/8x1/8(same size)=70 +S+H tank rivet Thats as of 2 weeks ago,motto of the math ,don't cross the border. Rick 233R

Date: Fri, 16 Dec 2011 08:04:30 -0900
From: paul.lennemann@dcsol.com
Subject: [rebel-builders] Tank Rivets
To: rebel-builders@dcsol.com

Are all tank rivets created equal as far as strength is concerned? I
need to buy about 200 more to supplement the MAM RR-6403's that I
have. Any recommendations on a source?

Thanks, Paul Lennemann SR 074



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Drew Dalgleish]

In London busy bee, federated tool, windsor factory supply all carry
them. My local rona store in Exeter usually has #30 bits for the
aluminum siding guys. I never bothered buying any #40 bits. Clecoes fit
fine in a 3/32' hole.

On 16/12/2011 4:17 PM, Doug Farrow wrote:

Different topic
Drill bits
I'm looking for # drills. # 30,40,20 and 11. I can't believe how hard they are to find here in Ontario can anyone help
Thanks
Doug
778R

Sent from my iPhone

On 2011-12-16, at 3:06 PM, paul.lennemann@dcsol.com wrote:

Thanks for the point in the right direction. There is nothing like great
information to remind me to send some $ to Mike.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Doug Farrow]

I ordered # 30 , #20 , 3/32 drill bits from Busy Bee in Concord Ontario on Mon . They were in my mailbox on Tues . Unbelievable especially at Christmas time .# 11 and # 40 have been discontinued .




Doug Farrow
Re/Max North Country
191 Haliburton Street
Haliburton, ON K0M 1S0
705-457-1011 Office
905-925-4972 Cell

Date: Sun, 18 Dec 2011 10:47:07 -0500
From: drewjan@cabletv.on.ca
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Tank Rivets

In London busy bee, federated tool, windsor factory supply all carry
them. My local rona store in Exeter usually has #30 bits for the
aluminum siding guys. I never bothered buying any #40 bits. Clecoes fit
fine in a 3/32' hole.

On 16/12/2011 4:17 PM, Doug Farrow wrote:

Different topic
Drill bits
I'm looking for # drills. # 30,40,20 and 11. I can't believe how hard they are to find here in Ontario can anyone help
Thanks
Doug
778R

Sent from my iPhone

On 2011-12-16, at 3:06 PM, paul.lennemann@dcsol.com wrote:

Thanks for the point in the right direction. There is nothing like great
information to remind me to send some $ to Mike.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------