Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] Folkerts Fuel Leak

Converted from Wildcat! database. (read only)
Locked
Wayne G. O'Shea

[rebel-builders] Folkerts Fuel Leak

Post by Wayne G. O'Shea » Sun Feb 19, 2012 11:37 pm

Congrats Jerald... so easy to miss a spot, even after thinking it all
through in advance (even after many tanks in the books ;o) ).

----- Original Message -----
From: "Jerald Folkerts" <jfolkerts1@gmail.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, February 13, 2012 8:08 PM
Subject: [rebel-builders] Folkerts Fuel Leak


[quote]Yea!!!!!!!!!!!!!! The balloon is staying up. My problem was strictly due
to an oversight on my part, and not sealing the edges of the doublers
(backer plates) that extend into the fuel tank on the main spar. Although
I
had pro sealed them with Type A2 when I assembled them, I somehow didn't
catch the bottom edge where the two flanges overlapped, the spar and the
doubler. I had sealed the skin/flange overlap, as well as the vertical
seam, but for some reason didn't seal the lower seam. The air was getting
between the two on the edge and moving horizontally out of the tank. I
had
to cut a hole in the third bay, a 2

Locked