Page 1 of 1

[rebel-builders] Float Hydraulics Check Valves and pump o rings

Posted: Sun Feb 19, 2012 11:36 pm
by Wayne G. O'Shea
A pretty sad reply... considering they know exactly what size the assembly
uses!

I'm pretty sure I have a drawing for it somewhere.. I'll look for it on
Wednesday.. as tomorrow is Scan, Oncol and Surgeon check up day for Jen.

----- Original Message -----
From: "Jbcressman" <jbcressman@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, January 16, 2012 4:44 PM
Subject: Re: [rebel-builders] Float Hydraulics Check Valves and pump o rings

Nig...When I asked MAM about cylinder o-rings I was told to go to any auto
supply and buy a kit of a variety of sizes!
I bought such a kit but have not yet changed the rings. Bob 331R



-----Original Message-----
From: Drew Dalgleish <drewjan@cabletv.on.ca>
To: rebel-builders <rebel-builders@dcsol.com>
Sent: Mon, Jan 16, 2012 7:04 am
Subject: Re: [rebel-builders] Float Hydraulics Check Valves and pump o
rings


Hi Nig Haven't had to change the o rings yet but the check valves are
a common industrial part. I got replacements at the local hose
headquarters



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------