Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

[rebel-builders] For Sale: N337PB, engine, prop and parts

Converted from Wildcat! database. (read only)
Locked
Khipp

[rebel-builders] For Sale: N337PB, engine, prop and parts

Post by Khipp » Sun Feb 19, 2012 11:36 pm

I had the E22Subaru before converting to Lycoming. it too was advertised 165 HP. Turned out it was 135 HP. the 165 is apparently 2.2 litre

karl hipp




On Jan 10, 2012, at 7:30 AM, "J Portman" <baron@baron.com> wrote:
I've owned N337PB, a Rebel since 2003. I've only put about 100 hours total on
it due to time constraints.I had planned to convert from the Subaru to Lycoming.
The engine was a Crossflow package and runs strong, I just wanted the Lycoming.

It is a flying airplane. I will annual it prior to sale.

I also have a freshly overhauled Lycoming 0320 with 160HP, a Hartzell constant speed prop fresh from the overhaul shop, prop governor, pressure carburetor, one PMAG ignition and a brand new Murphy engine mount as well as the airplane.

I am asking $20K for the engine package with prop, governor, carburetor, pmag and mount.

I am asking $30K for the airplane, or $48K for the entire thing.

See some more details and pictures at http://new.baron.com/murphy

Equipment:
* 2000 Murhpy Rebel with 113 TTAE
* Subaru EJ20 2.0 liter 16 valve DOHC Fuel injected engine (165 HP)
* Warp Drive 3 bladed ground adjustable propeller.
* Ross reduction drive (2.15 ratio)
* New Battery
* Valcom 760 Com Radio.
* Magellan SkyNav GPS (needs database update)
* Narco Transponder
* Position and Strobe lights.
* Two place intercom
* Ameriking ELT
* Ameriking encoder

Specifications:
* Gross Weight 1650
* Empty Weight 1030
* Top Speed Sea Level 125 MPH
* Cruise 75% power @ 6000 ft 110MPH
* Fuel Capacity 32 gallons
* Sea Level Climb � 900 fpm
* Ceiling 15,000
* Take off
* Ground run 500 ft
* Over 50 ft obstacle 900 ft

* Landing
* Landing roll 350 ft
* Over 50 ft obstacle 700

* Baggage 100 lbs
* Oil Capacity 6 quarts






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
jack korycki

[rebel-builders] For Sale: N337PB, engine, prop and parts

Post by jack korycki » Sun Feb 19, 2012 11:36 pm

Where is your plane located? Please call me at 867-445-3641.



________________________________
From: Khipp <khipp@99victor.com>
To: "<rebel-builders@dcsol.com>" <rebel-builders@dcsol.com>
Sent: Tuesday, January 10, 2012 8:37:38 AM
Subject: Re: [rebel-builders] For Sale: N337PB, engine, prop and parts

I had the E22Subaru before converting to Lycoming. it too was advertised 165 HP. Turned out it was 135 HP. the 165  is apparently 2.2 litre

karl hipp




On Jan 10, 2012, at 7:30 AM, "J Portman" <baron@baron.com> wrote:
I've owned N337PB, a Rebel since 2003. I've only put about 100 hours total on
it due to time constraints.I had planned to convert from the Subaru to Lycoming.
The engine was a Crossflow package and runs strong, I just wanted the Lycoming.

It is a flying airplane. I will annual it prior to sale.

I also have a freshly overhauled Lycoming 0320 with 160HP, a Hartzell constant speed prop fresh from the overhaul shop, prop governor, pressure carburetor,  one PMAG ignition and a brand new Murphy engine mount as well as the airplane.

I am asking $20K for the engine package with prop, governor, carburetor, pmag and mount.

I am asking $30K for the airplane, or $48K for the entire thing.

See some more details and pictures at http://new.baron.com/murphy

Equipment:
* 2000 Murhpy Rebel with 113 TTAE
* Subaru EJ20 2.0 liter 16 valve DOHC Fuel injected engine (165 HP)
* Warp Drive 3 bladed ground adjustable propeller.
* Ross reduction drive (2.15 ratio)
* New Battery
* Valcom 760 Com Radio.
* Magellan SkyNav GPS (needs database update)
* Narco Transponder
* Position and Strobe lights.
* Two place intercom
* Ameriking ELT
* Ameriking encoder

Specifications:
* Gross Weight 1650
* Empty Weight 1030
* Top Speed Sea Level 125 MPH
* Cruise 75% power @ 6000 ft  110MPH
* Fuel Capacity 32 gallons
* Sea Level Climb � 900 fpm
* Ceiling 15,000
* Take off
* Ground run                      500 ft
* Over 50 ft obstacle        900 ft

* Landing
* Landing roll                      350 ft
* Over 50 ft obstacle          700

* Baggage                                  100 lbs
* Oil Capacity                            6 quarts






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Ian W Berry

[rebel-builders] For Sale: N337PB, engine, prop and parts

Post by Ian W Berry » Sun Feb 19, 2012 11:36 pm

Hi,I am Perth Western Australia What area in the US are you ?I wrote a Rebel
of hitting a tree and am looking for a replacement I would take it as is and
use the engine from the one that i destroyed. regards Ian Berry

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of J
Portman
Sent: Tuesday, 10 January 2012 10:31 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] For Sale: N337PB, engine, prop and parts

I've owned N337PB, a Rebel since 2003. I've only put about 100 hours total
on
it due to time constraints.I had planned to convert from the Subaru to
Lycoming.
The engine was a Crossflow package and runs strong, I just wanted the
Lycoming.

It is a flying airplane. I will annual it prior to sale.

I also have a freshly overhauled Lycoming 0320 with 160HP, a Hartzell
constant speed prop fresh from the overhaul shop, prop governor, pressure
carburetor,
Top
Bob Bjorn

[rebel-builders] For Sale: N337PB, engine, prop and parts

Post by Bob Bjorn » Sun Feb 19, 2012 11:36 pm

Hi Guy, I'm interested in your Lycombing package. Where are you in the
US, Bob




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
J Portman

[rebel-builders] For Sale: N337PB, engine, prop and parts

Post by J Portman » Sun Feb 19, 2012 11:36 pm

Greetings. I am in San Antonio Texas (and the plane as well).
I can be reached at 210 316-2300

JP

On Wed, 11 Jan 2012 19:01:54 +0800, Ian W Berry wrote
Hi,I am Perth Western Australia What area in the US are you ?I wrote
a Rebel of hitting a tree and am looking for a replacement I would
take it as is and use the engine from the one that i destroyed.
regards Ian Berry

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf
Of J Portman Sent: Tuesday, 10 January 2012 10:31 PM To:
rebel-builders@dcsol.com
Subject: [rebel-builders] For Sale: N337PB, engine, prop and parts

I've owned N337PB, a Rebel since 2003. I've only put about 100 hours
total on it due to time constraints.I had planned to convert from
the Subaru to Lycoming. The engine was a Crossflow package and runs
strong, I just wanted the Lycoming.

It is a flying airplane. I will annual it prior to sale.

I also have a freshly overhauled Lycoming 0320 with 160HP, a Hartzell
constant speed prop fresh from the overhaul shop, prop governor, pressure
carburetor,
Top
J Portman

[rebel-builders] For Sale: N337PB, engine, prop and parts

Post by J Portman » Sun Feb 19, 2012 11:36 pm

On Tue, 10 Jan 2012 10:47:35 -0800 (PST), jack korycki wrote
Where is your plane located? Please call me at 867-445-3641.
The plane is in San Antonio Texas.

I will call Monday.
JP
________________________________
From: Khipp <khipp@99victor.com>
To: "<rebel-builders@dcsol.com>" <rebel-builders@dcsol.com>
Sent: Tuesday, January 10, 2012 8:37:38 AM
Subject: Re: [rebel-builders] For Sale: N337PB, engine, prop and parts

I had the E22Subaru before converting to Lycoming. it too was
advertised 165 HP. Turned out it was 135 HP. the 165  is apparently
2.2 litre

karl hipp

On Jan 10, 2012, at 7:30 AM, "J Portman" <baron@baron.com> wrote:
I've owned N337PB, a Rebel since 2003. I've only put about 100 hours total on
it due to time constraints.I had planned to convert from the Subaru to
Lycoming.
The engine was a Crossflow package and runs strong, I just wanted the
Lycoming.
It is a flying airplane. I will annual it prior to sale.

I also have a freshly overhauled Lycoming 0320 with 160HP, a Hartzell
constant speed prop fresh from the overhaul shop, prop governor, pressure
carburetor,  one PMAG ignition and a brand new Murphy engine mount as well as
the airplane.
I am asking $20K for the engine package with prop, governor, carburetor,
pmag and mount.
I am asking $30K for the airplane, or $48K for the entire thing.

See some more details and pictures at http://new.baron.com/murphy

Equipment:
* 2000 Murhpy Rebel with 113 TTAE
* Subaru EJ20 2.0 liter 16 valve DOHC Fuel injected engine (165 HP)
* Warp Drive 3 bladed ground adjustable propeller.
* Ross reduction drive (2.15 ratio)
* New Battery
* Valcom 760 Com Radio.
* Magellan SkyNav GPS (needs database update)
* Narco Transponder
* Position and Strobe lights.
* Two place intercom
* Ameriking ELT
* Ameriking encoder

Specifications:
* Gross Weight 1650
* Empty Weight 1030
* Top Speed Sea Level 125 MPH
* Cruise 75% power @ 6000 ft  110MPH
* Fuel Capacity 32 gallons
* Sea Level Climb � 900 fpm
* Ceiling 15,000
* Take off
* Ground run                      500 ft
* Over 50 ft obstacle        900 ft

* Landing
* Landing roll                      350 ft
* Over 50 ft obstacle          700

* Baggage                                  100 lbs
* Oil Capacity                            6 quarts






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Top
Locked

Return to “Rebel Builders List”