Elevator ;Rudder TIPS /nut plates

[Mike Davis]

Received: from JimsRebel@aol.com
by imo14.mx.aol.com (IMOv18.1) id EMWMa23945
for <murphy-rebel@dcsol.com>; Sat, 26 Dec 1998 17:09:33 -0500 (EST)
From: JimsRebel@aol.com
Message-ID: <cb506743.36855e9d@aol.com>
Date: Sat, 26 Dec 1998 17:09:33 EST
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: Elevator ;Rudder TIPS /nut plates
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0 for Windows 95 sub 49

Hi Johannes
Nut Plates are the same as "ANCHOR NUT" which are shipped with the kit
under
the part number "F5000-3" or MS21059-3.
The MS number is the common part number used.
The -3 is the size .. 3/16 bolt or -4 for 1/4 inch bolt ,,,,
-8 for a screw size of 8-32
Hope this helps.
Jim JimsRebel@aol.com